|
Deep well Hand pump India Mark II
Under the Hand pump
project of the UNDP/World Bank, a consumers testing laboratory in the U.K. conducted extensive trials in the early
1980s of twelve different deep well Hand pumps from all over the world,
including France, Holland, Canada, Sweden, U.K., U.S.A. and India. The pump India Mark II was concluded the best for community water supply.
The entire Pump is Hot Dip Galvanised.
iNVENTURE oVERSEAS iNC is
specialized manufacturing and international trading company headed by
professionals and well experienced team. The company is engaged in
manufacturing business and has prestigious brand name REDBERRY England.
The
extraordinary success we have achieved in this short span of time is the result
of the excellence we exhibit in all our fields. At present, we are a globally
known manufacturer, exporter/importer, supplier and trader and our
business activities include numerous fields such as CORPORATE Water Solution
SUPPLY, , wholesale, super market supply, duty free shipping, hotel
supply, airlines in-flight supply, corporate supply, trial order, small
quantity order, door delivery shipment, occasion supply, NRI-expatriate orders,
marriage function and gift supply, online supply, project supply, NGO-UNO
supply, etc.
These are manufactured as per
Bureau of Indian Standards IS 15500 -
2004, covering hand pumps for lifting water from wells of depth 20m to 50m.
Above 50m, the efforts put in for pumping may not give adequate results in
terms of discharge of water and therefore extra deep well hand pump should be
used.
India
Mark III Hand Pump , VLOM 65
manufactured as per IS:15500 / 2004 is a modified version of India Mark II Hand
Pumps. The word VLOM is abbreviated
form for Village Level Operation &
Maintenance which itself signifies easy maintenance by village mechanic.
The basic difference in India Mark III Hand Pumps & India Mark II Hand
Pumps is that here pump has open top cylinder which facilitates easy maintenance
of plunger Assembly and check Valve Assembly by pulling out from the cylinder
without pulling out the Cylinder / Riser pipe.
The main
sub-assemblies for the India Mark II hand pumps are as follows:
• Head with Handle Assembly
• Water Tank Assembly
• Stand Assembly
• Connecting Rods
• Riser Pipes (32mm NB)
•Cylinder Assembly
Apart from above we offer installation and
repairing toolkit and casing pvc pipe, couplings and drilling machines as per
clients requirement.
Advantages
• The entire pump is Hot dip galvanised to make it
corrosion resistant in our in-house plant.
• The handle is so designed that it balances the
counter-weight of the connecting rods and the ball-bearing insures ...frictionless and effortless operation as a result of
this. Even a small child can pump water effortlessly.
• Specially processed Nitrile rubber cup washer
ensures long life and durability.
• Riser pipes of 32 mm diameter is used so that the
installation cost is very low.
• Special tool kit available for repair and
maintenance
• It can be used for wells of 100 mm dia.
Deepwell Hand pump India Mark III VLOM 65
It
consists of the following
• Pump Head with Handle Assembly
• Water Tank Assembly
• Stand Assembly
• Connecting Rods
• Cylinder Assembly
• Riser Pipes (65mm NB)
Advantages
• All advantages of India Mark II besides being VLOM.
• This pump has open top cylinder so the components
can ...be extracted from cylinder for maintenance
without ...pulling out cylinder / riser pipes.
• Riser Pipe Centralizer and cone Assembly for
correct ...alignment of pipes....It can used for wells of 125 / 150 mm dia.
Deep well Hand pump India Mark III VLOM 50
India Mark III Hand
pump VLOM 50 manufactured as per IS:15500 / 2004. It is modified version of
India Mark III VLOM 65 mm pump where 50 mm diameter G.I. / P.V.C pipes are used
instead of 65 mm pipes.
It
consists of the followings assemblies :
• Pump Head with Handle Assembly
• Water Tank Assembly
• Stand Assembly
• Connecting Rod
• Cylinder Assembly
• Riser Pipe of 50 mm (G.I / P.V.C)
Advantages
:
• All advantages of India Mark II besides being ...VLOM.
• Lower capital cost due to Riser pipe of 50 mm
• Single Cylinder Assembly with only single gun metal
...components in each of the valves, hence no tools
are ...required for maintenance of valves
• It can be used for wells of 100 mm dia.
Force and Lift Hand pump
Force and lift hand
pumps is very much useful of supply of water for cleaning purpose of Public
Toilets in Urban and Rural areas. The Force & Lift hand pump is installed
upto a maximum depth of 90 mtrs. On the existing / already drilled base wells.
The water available by this pump is stored in a storage tank installed upto 6
mtrs. (20 ft.) above ground level.
SALIENT FEATURES
OF THE PUMP
• It is suitable for 100 / 125 / 150 mm
diameter bore wells with maximum static water level upto 80 meters and depth 90
meters.
• The discharge of this pump is about 10 / 15 liters
per minute.
• Low capital and repairs / maintenance cost.
• This pump is most suitable in the areas where there
is no electricity supply.
• Since storage tank is utilized with the
installation of Force & Lift Pump, water is made available throughout the
day & night.
• India Mark II, India Mark III VLOM 50 and extra
deep well hand pump may be used for this purpose.
EXTRA DEEP WELL HANDPUMP
This pump is
basically India Mark II Hand Pump with few modifications in Head, Handle &
Cylinder Assembly for extracting water from greater depth. They are suitable
for static water levels varying between 50 & 90 meters where placement of
cylinders can be upto 85 meters. The inner diameter of the bore well, where
these pumps are being manufactured as per BIS specifications IS :15500 / 2004.
Direct Action Hand pump (TARA)
Tara Hand pump is a
UNICEF designed water pumps which operates both downward and upward stroke of
the piston. All the ground parts of this pump are made of non-corrosive
material like P.V.C and Stainless Steel. So this pump is most durable. This
hand pump is suitable for lifting water from bore well with static water level
not exceeding 15 mtrs. It is safer from bacterial contamination and corrosion
problems
Advantages
:
• Can work upto a depth of 15 meters
• More cost effective than other Deep well Hand pumps
• All below ground components are of PVC or Stainless
steel and hence the ...pump is extremely resistant to
corrosion
• Can be easily installed and maintained using only
the minimal tools supplied ...with the pump
• Gives water in both the upward and the downward
stroke of the piston
• Direct Action Hand pump works on the buoyancy
principle and hence is ...easier to operate
• All the pipes, tools and pumps parts needed for
complete installation are ...supplied with the pump.
Shallow Well Hand pump (Singrur)
This is a simple
and Robust C.I. Hand modified by UNICEF by making certain design of Nepal No.6
pump. The plunger uses a moulded PVC Cup seal with two 3 mm disc
(Electroplated) and the check Valve is a floating valve system of Nitrile
Rubber with M.S. Weight.
It consists of
following parts :
• Pump base with floating valve
• Pump body
• Pump head with fulcrum
• Handle
• Plunger rod assembly
The pump body is made of cast
iron. The piston rod is made of 12mm dia. bright bar, electro-galvanized. The
total weight of the complete suction pump is approximately 32kg.
Advantages :
• A sliding plate has been provided on the top of the
head to prevent water contamination
• Can work upto a depth of 7 meters.
• A low cost pump which gives high discharge.
• Extremely sturdy and capable of withstanding rough
usage, practically no maintenance even after extensive use.
• Suitable for community water supply.
• Very reliable Valve System and durable PVC Cup
seals.
• Maintenance is very simple and requires only basic
tools.
• Much higher discharge than any comparable pump.
AFRIDEV HAND PUMP
The Afridev Deep
well Hand pump has emerged from field trials in Africa and currently its specification is
controlled by SKAT, Switzerland. Currently, there are three revisions of
this pump. This is also VLOM (Village Level Operation & Maintenance pump)
means open top cylinder.
ADVANTAGES
:
• The Above-ground mechanism consists of sturdy Mild Steel
(MS) fabricated Pump Head, Handle and Pedestal assemblies, hot dip galvanised
for corrosion resistance.
• Bearing bushes for the pivot assemblies are made
from injection moulded special grade plastic.
• Variable handle settings are possible to meet changes
in static water levels.
• Customisation of spout length and Pedestal is
possible.
• Standard below-ground mechanism comprises of 10mm
dia., Hot Dip Galvanised connecting rods, 63mm OD PVC Riser pipes with cemented
joints and PVC jacketed 50mm ID brass lined cylinder assembly.
• 225mm stroke length of the handle provides a water
discharge of 1350 litres per hour with an installation depth range between 15m
to 45m below-ground water.
• Easy to install, can be accomplished by village
women mechanics.
• Alternative stainless steel lined cylinder
available for aggressive water conditions.
• Quick release Eye & Hook tool-less ends on
Connecting Rods with rubber centralizers facilitate maintenance and protect the
riser pipe against internal wear.
• Special tools for installation & maintenance of
Afridev is available.
MALAWI TREADLE PUMP
Above Pump is most
commonly used for irrigation purpose in Malawi and other African countries. It is human
powered pump designed for small scale Irrigation. It lifts water from shallow
wells & surface sources like ponds, rivers etc. It can be operated by
either one person or two persons.
Main
Features of pump. :
• High capacity 5000 liters / hour from depth of 5
meters and is capable of delivering discharge upto 3 metes height and 20meter
horizonatal distance.
• It is portable and can be moved from one place to
another
• Can easily be assembled & dismantled. Hot Dip
Galvanized at our in - house Hot Dip Galvanizing plant as per BS : 729
Standards. All fasteners are electroplated.
• Double Cylinder pump so both downward and upward
stroke delivers water hence optimum utilization of human energy spent is achieved.
The pump comprises
of two Cylinders, wooden base board Inlet pipe with treadle support, piston
fod, handle, CI Pulley, Piston Seals, Piston Discs, Intermediate Washer, Rubber
Gasket for base board, Polypropylene rope, Flap valve, Valve Holding plate
bolted in Valve box and electroplated fasteners as required.
Metal and Bamboo Treadle Pump
The Treadle Pump is a variation on
the standard treadle pump that allows water to be lifted above the level of the
pump itself. This greatly increases the versatility of the pump.
• water can be lifted to elevated plots of
land.
• It can be pumped through hoses over long distances
(up to 500 m) .
• It works with total head 55feet with maximum 20feet
suction lift.
• It can be used to fill the elevated tanks of drip
and sprinkler irrigation systems.
• The discharge out put is 3000-5000 liters per hour
depending upon the depth.
The Pressure
Treadle Pump retains the advantages of the standard treadle pump, including low
cost (albeit slightly more expensive than the standard version), efficient foot
powered
• operation. Locally manufactured, easily
maintained and the ability to genetate significant additional income for small holders.
• It is a double cylinder and double acting model
both downward stroke and upward stroke delivers water and optimum utilization
of energy is achieved.
• A portable self contained unit sits at ground
level.
• Flexibility in installation it can be moved from
one location to another without any permanent installation on a single well.
Pedal may be of either Bamboo of Metal.
Good News For Farmers! No Electricity Required. It Cab Be Installed On 4", 6", 8" And 10" bore well And
Even On Open Well With 20 Feet Belt Arrangement.
With German Technology With Capacity to Pump up From 50 Feet To 350 Feet . Can Fetch Water From As Long As 1600 Feet From Point Of Source (River) To Delivery Point(Farm)
Can be run on Electric motor, DIESEL, PETROL OR LPG, CNG and now on Solar System run machines. |
| |
|
|
|
| |
 |
|
|
|
| |
 |
| |
|
» Features |
| |
| 1 |
Desing as per standard bureau of india and bs |
| 2 |
With german technology with capacity to pump up from 50 feet to 350 feet |
| 3 |
This pump run by electric motor or diesel engine or tractors till the depth of 300 feets. |
| 4 |
Can fetch water from as long as 1600 feet from point of source (river) to delivery point (farm) |
| 5 |
Sturdy and easy to maintain, also saves on fuel |
| 6 |
You can run turbine pump and sprinkle with single machine at a time. |
| 7 |
This turbine pump uses water as lubricant instead of oil so life of head and pump will enhanced and big saving on oil too. |
|
| |
|
| » Advantages |
| |
| 1 |
Minimum use of floor space. |
| 2 |
The npsh available can be the Lowest level to satisfy the npsh Requirements of the pump. |
| 3 |
No priming required, the pump Bowl assembly is submerged in The fluid being pumped. |
| 4 |
The vertical turbine is highly versatile and adaptable in terms of Both location and pump-length. |
| 5 |
Ideal for fetching water for domestic and animal drinking water tank. |
| 6 |
The
variety of materials and Construction possibilities to meet Special
requirements (such as Corrosion resistance) is virtually Unlimited. |
| 7 |
The vertical turbine pump is Adaptable to various design Codes. |
| 8 |
Easily modified for changing Hydraulic conditions. |
| 9 |
Low operating speeds. |
|
| |
|
| » Pumps Has A Long History |
| |
Of Providing innovative pumping solutions to Business partners in the following industries:
The vertical turbine pump was initially developed in the late 1800's
for agricultural pumping. since then, continuous improvements, special
designs and new materials have made it ideal for municipal and plant
water supply, drainage, flood control, pipeline pumping, power plant
service, Petro-Chemical Applications, high pressure pumping and other
industrial uses of all types. | |
|
